[./index.html]
[./contact_us.html]
[./accessories.html]
[./back_yard_fire_protection.html]
[./brass_fittings_26_adapters.html]
[./econoflo_flat_hose.html]
[./ecocnforestt.html]
[./combat_ready_fire_hose.html]
[./darquest_lightweight_fire_hose.html]
[./darley_800_fire_hose.html]
[./darley_stripe_fire_hose.html]
[./hi_rise_fire_hose.html]
[./large_diameter_fire_hose.html]
[./rack_hose.html]
[./spec_187_forestry_fire_hose.html]
[./supplyline2122_hose.html]
[./tidalwave_6002122_hose.html]
[Web Creator] [LMSOFT]
  

Item Number

Description

Diameter

Length

Connecter Type

Price

Quantities
20240
 Econoflo
5/8 in
l0 ft.
Garden Hose Threads
$13.89
 
20246
 Econoflo
5/8 in
15 ft.
Garden Hose Threads
$18.20
 
20255
 Econoflo
5/8 in
25 ft.
Garden Hose Threads
$36.50
 
20275
 Econoflo
5/8 in
50 ft.
Garden Hose Threads
$49.46
 
20263
 Econoflo
5/8 in
100 ft.
Garden Hose Threads
$61.47
 
20231
 Econoflo
3/4 in.
50 ft.
Garden Hose Threads
$38.76
 
20215
 Econoflo
3/4 in.
100 ft.
Garden Hose Threads
$62.11
 
  
ECONOFLO™ specifications
 
●The hose shall be a single jacket construction with 100% spun polyester yarn.
●There shall be a minimum of 21.0 filler yarns per inch in the jacket.
●The thickness of the lining shall be 0.012" (305 µm) minimum and it shall be constructed of extruded T.P.U. elastomer.
●If required (optional), the outside jacket shall be treated with yellow ENCAP elastomer, which shall completely encapsulate the jacket 
  fibers and not merely surface coat the jacket.
●The hose service temperature range shall be -60°F to 140°F (-51°C to 60°C).
●At 300 PSIG (2100 kPa), its elongation shall not exceed 2% of the initial hose length, it shall not warp more than 10 inches (25 cm) and
   should not rise from the test table.
●The hose shall not twist more than 5 turns per 50 ft (15,2 m) while at 300 PSIG (2100 kPa).
●Minimum service test pressure of 150 PSIG (1050 kPa).
●Minimum proof test pressure of 300 PSIG (2100 kPa).
●Minimum straight burst test pressure of 600 PSIG (4200 kPa).
●The hose while curved to a radius of 27" (69 cm) shall not burst at less than 600 PSIG (4200 kPa).
  
Econoflo®
Physical properties
 
 
 
Physical properties
Spec Number
Coupling bowl size
Weight per 50 ft
Coil Diameter per 50 ft
5/8"
2463
5/8" GHT
1 lb
9"
(16 mm)
 
(15.9 mm)
(0.5 kg)
(23 cm)
3/4"
2475
3/4" GHT
1.5 lbs
9"
(19 mm)
 
(19.1 mm)
(0.7 kg)
(23 cm)
  
A versatile multipurpose high-pressure fire hose made with 100% virgin spun polyester and lightweight, high strength T.P.U. lining. Coupled with brass ferrule type couplings with garden hose thread. This hose is perfect for garden hose use. The primary design of this hose was for fighting forest fires. Some of the applications were filling pump cans, protecting pump operating areas, supplying sprinklers, low volume hand-lines, remote fire-line protection and mop up.

After the introduction of this small fire fighting hose to the general public, primarily as a drinking water supply for RV and campers. It is Drinking Water Certified, lightweight, compact, and easy to use. The superior quality and design of the Econoflo hose, makes it the choice of everyone that uses it. Compare the Superior design and quality of an Econoflo® flat hose, to other flat and vinyl Garden hose. When it comes to other flat hoses, like the ones seen on TV, you hear statements like, based on Fire hose technology or similar to Fire hoses. The ECONO Series hoses are made of Fire hose material, they are Fire Fighting hoses. Think about this, with each purchase, you get a very Hi Quality flat hose and have the satisfaction of providing jobs for the Visually challenged. Assembled by: Oklahoma League for the Blind:
For your convenience we accept: